View 2SD1262A_462075.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Power Transistors
2SD1262, 2SD1262A
Silicon NPN triple diffusion planar type darlington
For midium speed power switching Complementary to 2SB0939, 2SB0939A
10.00.3 1.50.1
Unit: mm
8.50.2 6.00.2 3.40.3 1.00.1
Collector-base voltage (Emitter open)
2SD1262 2SD1262A
VCBO VCEO VEBO IC ICP PC
60 80 60 80 7 8 12 45 1.3
V
(6.5)
Collector-emitter voltage 2SD1262 (Base open) 2SD1262A Emitter-base voltage (Collector open) Collector current Peak collector current Collector power dissipation Ta = 25C Junction temperature Storage temperature
V
V A A W C C E B
1: Base 2: Collector 3: Emitter N-G1 Package
Note) Self-supported type package is also prepared.
Internal Connection
C
Tj Tstg
150 -55 to +150
Electrical Characteristics TC = 25C 3C
Parameter Collector-emitter voltage (Base open) Collector-base cutoff current (Emitter open) 2SD1262 2SD1262A 2SD1262 2SD1262A IEBO hFE1
*
Symbol VCEO ICBO
Conditions IC = 30 mA, IB = 0 VCB = 60 V, IE = 0 VCB = 80 V, IE = 0 VEB = 7 V, IC = 0 VCE = 3 V, IC = 4 A VCE = 3 V, IC = 8 A IC = 4 A, IB = 8 mA IC = 4 A, IB = 8 mA VCE = 10 V, IC = 0.5 A, f = 1 MHz IC = 4 A IB1 = 8 mA, IB2 = -8 mA VCC = 50 V
Min 60 80
Typ
Max
(7.6)
Parameter
Symbol
Rating
Unit
Unit V
100 100 2 1 000 500 1.5 2.0 20 0.5 4.0 1.0 10 000
A mA V V MHz s s s
Emitter-base cutoff current (Collector open) Forward current transfer ratio
hFE2 Collector-emitter saturation voltage Base-emitter saturation voltage Transition frequency Turn-on time Strage time Fall time VCE(sat) VBE(sat) fT ton tstg tf
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *: Rank classification Rank hFE1
Publication date: April 2003
R 1 000 to 2500
Q
P
2 000 to 5 000 4 000 to 10 000
SJD00178BED
(1.5)
Absolute Maximum Ratings TC = 25C
2.00.5
* High forward current transfer ratio hFE * High-speed switching * N type package enabling direct soldering of the radiating fin to the printed circuit board, etc. of small electronic equipment.
4.40.5
1
2
0.80.1 R = 0.5 R = 0.5 2.540.3 1.00.1 1.40.1 0.40.1 5.080.5 (8.5) (6.0) 1.3 3
4.40.5
0 to 0.4
14.40.5
3.0+0.4 -0.2
1.5+0 -0.4
Features
1
2SD1262, 2SD1262A
PC Ta
50
(1)
IC VCE
Collector-emitter saturation voltage VCE(sat) (V)
12
TC=25C
VCE(sat) IC
10
(1) IC/IB=250 (2) IC/IB=500 (3) IC/IB=1000 TC=25C (3) (2) (1)
Collector power dissipation PC (W)
40
Collector current IC (A)
(1)TC=Ta (2)With a 50x50x2mm Al heat sink (3)Without heat sink (PC=1.3W)
10
8
IB=4.0mA 3.5mA 3.0mA 2.5mA 2.0mA 1.5mA 1.0mA 0.5mA
30
1
6
20
4
0.1
10
(2) (3)
2
0
0
40
80
120
160
0
0
1
2
3
4
5
0.01 0.1
1
10
Ambient temperature Ta (C)
Collector-emitter voltage VCE (V)
Collector current IC (A)
VCE(sat) IC
Collector-emitter saturation voltage VCE(sat) (V) Base-emitter saturation voltage VBE(sat) (V)
IC/IB=500
VBE(sat) IC
105
IC/IB=500
hFE IC
VCE=3V TC=100C
10
TC=100C 25C -25C
10
Forward current transfer ratio hFE
104
25C -25C
TC=-25C
25C
1
1
100C
103
0.1
0.1
102
0.01 0.1
1
10
0.01 0.1
1
10
10 0.1
1
10
100
Collector current IC (A)
Collector current IC (A)
Collector current IC (A)
Safe operation area
100
Non repetitive pulse TC=25C
Rth t
103
(1)Without heat sink (2)With a 50x50x2mm Al heat sink (1) (2)
Thermal resistance Rth (C/W)
ICP
t=10ms
102
Collector current IC (A)
10
IC t=1ms t=300ms
10
1
1
0.1
2SD1262A 2SD1262
10-1
0.01
1
10
100
1 000
10-2 10-4
10-3
10-2
10-1
1
10
102
103
104
Collector-emitter voltage VCE (V)
Time t (s)
2
SJD00178BED
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL
This datasheet has been download from: www..com Datasheets for electronics components.

▲Up To Search▲

Price & Availability of 2SD1262A

	To Download 2SD1262A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .